CCD-15APS-1

Clear Connect™ Switching Plug in Device - 15A Softswitch®

DescriptionClear Connect Switching Plug in Device - 15A Softswitch
Part #FG2606-51-WH

GOING GREEN
The AMX Clear Connect Wireless Gateway system can be programmed to turn lights and other AV equipment off when not in use.

TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Getting Started with AMX Clear Connect

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

This Product is Available Only in the U.S. and Canada.

OVERVIEW
The Lutron Clear Connect CCD-15APS-1 provides full 15A capacity using Lutron's patented Softswitch Technology. The Switch when added to a Clear Connect System provides light control to any appliance plugged into it. Plug-in the appliance to provide on/off control from keypads, sensors, or integration with AMX control systems.

FEATURES

  • Clear Connect Enabled – Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
  • Simple Web Configuration – Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Switch

DEALER BENEFITS

  • Easily Add Light Control – Integrates with existing electrical infrastructures – simply replace the light switch
  • Reliable Light Control – Lutron's patented Clear Connect RF Technology ensures ultra-reliable wireless communication between components
  • Simplified AMX Integration - Use an intuitive web browser to add devices, create scenes, and program the system with no installed software tools

CUSTOMER BENEFITS

  • Ideal For Existing or Retrofit Applications – Wireless light solution can be added to any room
  • Save Energy – Dim a standard halogen or incandescent light bulb by 25% to save 20% energy; dim more, save even more and extend bulb life
  • Automatic Shutdown - Turn off lights and AV equipment that were inadvertently left on
  • Add Convenience and Easily Create the Right Ambiance - At the touch of a button, adjust the lights to give you the right light when you need it, where you want it

SPECIFICATIONS

POWER

  • Power: 120 V 50 / 60 Hz
  • Typical Power Consumption
    • Dimmer / Switch: 0.3 W
    • Test conditions: load is off
  • Surge Protection: To withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
  • Power Failure: Power failure memory: should power be interrupted,the RF Plug-In Module will return to its previous state when power is restored

ENVIRONMENTAL

  • Operating Temperature: 32° F (0° C) to 104° F (40° C)
  • Operating Humidity: 0% to 90%, non-condensing
  • Indoor use only

ESD PROTECTION
To withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2

COMMUNICATIONS

  • Plug-In Modules communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of repeater

CERTIFICATIONS
cUL, UL, FCC, IC, SCT, NOM (-3PD only; -15APS pending)

TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Getting Started with AMX Clear Connect

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.