CCD-W6BRL

Clear Connect™ Wall Keypad - 6-Button with Raise/Lower

DescriptionClear Connect Wall Keypad - 6-Button with Raise/Lower
Part #FG2606-61-WH

GOING GREEN
The AMX Clear Connect Wireless Gateway system can be programmed to turn lights and other AV equipment off when not in use.

TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Getting Started with AMX Clear Connect

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

This Product is Available Only in the U.S. and Canada.

OVERVIEW
The Lutron Clear Connect CCD-W6BRL is a wireless Keypad that can be configured to control lights, shades and AV equipment. Replace existing light switches with the CCD-W6BRL Keypad and offer system dimming control of the attached load. The Keypad when added to a Clear Connect System provides light control to virtually any location, without pulling wires. The single-gang 6-button Wall Keypad with raise and lower buttons is available in white and features backlit buttons and personalized engraving.

FEATURES

  • Clear Connect Enabled – Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
  • Perfect Way to Add Light Control – Easily integrates with existing electrical infrastructures – simply replace the light switch
  • Simple Web Configuration – Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Switch

DEALER BENEFITS

  • Easily Add Light Control – Integrates with existing electrical infrastructures – simply replace the light switch
  • Reliable Light Control – Lutron's patented Clear Connect RF Technology ensures ultra-reliable wireless communication between components
  • Simplified AMX Integration - Use an intuitive web browser to add devices, create scenes, and program the system with no installed software tools

CUSTOMER BENEFITS

  • Ideal For Existing or Retrofit Applications – Wireless light solution can be added to any room
  • Save Energy – Dim a standard halogen or incandescent light bulb by 25% to save 20% energy; dim more, save even more and extend bulb life
  • Automatic Shutdown - Turn off lights and AV equipment that were inadvertently left on
  • Add Convenience and Easily Create the Right Ambiance - At the touch of a button, adjust the lights to give you the right light when you need it, where you want it

SPECIFICATIONS

POWER

  • Power: 120 V 50 / 60 Hz
  • Typical Power Consumption
    • Keypads: 0.6 W

CODES
Install in accordance with all local and national electrical codes

ENVIRONMENTAL

  • Operating Temperature: 32° F (0° C) to 104° F (40° C)
  • Operating Humidity: 0% to 90%, non-condensing
  • Indoor use only

INSTALLATION
All keypads require a U.S. wallbox 3 1/2 in (89 mm) deep recommended, 2 1/4 in (57 mm) deep minimum.

ENGRAVING
The Prepaid Engraving Certificate included with the keypad can be redeemed for a custom engraved replacement kit. To order an engraved replacement kit please follow the instructions at: www.lutron.com/buttons.

RF DEVICE PLACEMENT

  • RF dimmers, switches, keypads and shades / drapes must be located within 30 ft (9 m) of an RF signal repeater.
  • For systems without an RF signal repeater, all RF dimmers, switches, keypads and shades / drapes must be located within 30 ft (9 m) of each other.
  • Remote dimmers and switches are not required to be within a specific range.

TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Getting Started with AMX Clear Connect

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.