OVERVIEW
The NI-700 unit is geared to meet the specific control and
automation needs of a single room environment, in which both
price and functionality are the driving requirements. The NI-700
is configured to control a limited number of video players,
projectors, lights, thermostats, and other electronic equipment.
COMMON APPLICATION
Ideal for single-room environments with a limited number of
devices such as classrooms, conference rooms, hotel rooms and
other applications.
FEATURES
- Ultra-fast 304 MIPS processor
- 2 Configurable RS-232 / RS-422 / RS-485 Serial Ports
- 1 IR/Serial Port
- 1 IR Receiver Port
- 4 Digital I/O Channels
- 1 Ethernet 10/100 Port
- 1 AxLink Connector
- 64 MB RAM
- 32 MB Flash Memory
- AMX Device Discovery enabled
SPECIFICATIONS
DIMENSIONS (HWD)
- 1 9/16" x 5 9/16" x 5 1/8" (4.01 cm x 14.10 cm x 13.00 cm)
- RU: 1
WEIGHT
1.30 lbs (590 g)
POWER
- 280 mA @ 12 VDC
- Power requirements are usage dependant
ENCLOSURE
Metal with black matte finish
ONBOARD MASTER
304 MIPS
CERTIFICATIONS
FCC Part 15 Class B, CE, and IEC 60950
FRONT PANEL COMPONENTS
- Program Port
- Configuration DIP Switch: Sets the communication parameters for the Program port
- IR RX LED: Red LED lights when IR data is being received via the rear IR RX port
- IR LED: Red LED lights during the transmission of IR or Serial data via the rear IR port
- I/O LEDs: Four yellow LEDs light when the rear I/O channels 1 - 4 are active. LED indicator for each I/O port reflects the state of that particular port
- Serial LEDs
- LINK/ACT: Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
- Status: Green LED lights when the Controller is programmed and communicating properly
- Output: Red LED lights when the Controller transmits data, sets channels sends data strings, etc.
- Input: Yellow LED lights when the Controller receives data from button pushes, strings, commands, channel levels, etc.
- ID Pushbutton: Sets the NetLinx ID (Device only) assignment for the device
REAR PANEL CONNECTORS
- RS-232/422/485 (Ports 1 & 2)
- IR RX (Port 5)
- Digital I/O (Port 4)
- IR/Serial (Port 3)
- AxLink LED
- AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector provides data and power to external control devices
- Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show communication activity, connection status, speeds, and mode information: - SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps. - L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets.
- Power Port
ENVIRONMENTAL
- Operating Temperature: 0° C (32° F) to 50° C (122° F)
- Operating Humidity: 20% to 85% RH
- Heat Dissipation (Typical): 11.5 BTU/hr
INCLUDED ACCESSORIES
- 2-pin 3.5 mm mini-Phoenix female PWR connector (41-5025)
- 4-pin 3.5 mm mini-Phoenix female connector (41-5047)
- 6-pin 3.5 mm mini-Phoenix female I/O connector (41-5063)
- CC-NIRC IR Emitter
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:
- AMX Essentials (Online)
- Getting Started with AMX (Online)
- Control Designer
- Quest for Power (Online)
- Control Installer
- Control Programmer 1
- Getting Started with AMX Modules (Online)
- Control Programmer 2
- Control Programmer 3
- Introduction to Duet (Online)
- Building Java Modules using Café Duet
For schedules and registration for these and any AMX University courses, visit www.amx.com/training.
TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:
- AMX Essentials (Online)
- Getting Started with AMX (Online)
- Control Designer
- Quest for Power (Online)
- Control Installer
- Control Programmer 1
- Getting Started with AMX Modules (Online)
- Control Programmer 2
- Control Programmer 3
- Introduction to Duet (Online)
- Building Java Modules using Café Duet
For schedules and registration for these and any AMX University courses, visit www.amx.com/training.
AWARD WINNING PRODUCTS
2005 High Impact of the Year
CE Pro asked readers which products had the biggest impact on their businesses this year These were products that helped dealers save money, boost margins and increase sales. They were the 2005 CE Pro High Impact Products (CHIPs) of the year.
