2 RU ENCLOSURE

GENERAL

• AC Power: 100-240 VAC single phase, 50-60 Hz
• Power Consumption (Max): 260 Watts
• Power Consumption (Typ): 110 Watts, fully loaded enclosure
• BTU/HR (Max): 887
• BTU/HR (Typ): 375, fully loaded enclosure
• Operational Temperature: 32° to 110° F (0° to 43° C)
• Storage Temperature: -22° to 158° F (-30° to 70° C)
• Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

• 3 1/2" x 19" x 12"
• 8.9 cm x 48.3 cm x 30.5 cm
• RU: 2

DIMENSIONS (HWD) WITHOUT RACK EARS

• 3 1/2" x 17 3/8" x 12"
• 8.9 cm x 44.2 cm x 30.5 cm
• RU: 2

WEIGHT

• Appx. 10 lbs (4.54 kg) per loaded enclosure

MTBF

• 92,000 Hours

CERTIFICATIONS

• CE, UL, cUL, RoHS / WEEE compliant

3 RU ENCLOSURE

GENERAL

• AC Power: 100-240 VAC single phase, 50-60 Hz
• Power Consumption (Max): 260 Watts
• Power Consumption (Typ): 150 Watts, fully loaded enclosure
• BTU/HR (Max): 887
• BTU/HR (Typ): 512, fully loaded enclosure
• Operational Temperature: 32° to 110° F (0° to 43° C)
• Storage Temperature: -22° to 158° F (-30° to 70° C)
• Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

• 5 3/16" x 19" x 12"
• 13.2 cm x 48.3 cm x 30.5 cm
• RU: 3

DIMENSIONS (HWD) WITHOUT RACK EARS

• 5 3/16" x 17 3/8" x 12"
• 13.2 cm x 44.2 cm x 30.5 cm
• RU: 3

WEIGHT

• Appx. 12 lbs (5.44 kg) per loaded enclosure

MTBF

• 92,000 hours

CERTIFICATIONS

• CE, UL, cUL, RoHS / WEEE compliant

VIDEO

HDMI VIDEO

• Compatible Formats: HDMI 1.3a (HDCP 1.3), DVI 1.0
• Data Rate (Max): 4.95 Gbps
• Pixel Clock (Max): 165 MHz
• Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz (1600x1200 @ 60 Hz and higher requires reduced blanking)
• Interlaced Resolution Support: 480i, 576i, 1080i
• Audio Format Support: Dolby Digital*, DTS*, L-PCM
• Audio Resolution: 16 bit to 24 bit
• Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz**, 192 kHz**
• Signal Type Support
• HDMI
• DVI-D (Single Link With Cable Adapter)
• DDC/EDID Support
• EDID provided by the Optima
• EDID is user re-programmable
• HDCP Support
• Yes, full matrix HDCP support (includes any input to any or all outputs)
• AMX HDCP InstaGate^® Technology
• Input Voltage (Nominal): 1.0 Vpp Differential
• Output Voltage (Nominal): 1.0 Vpp Differential
• Output Re-clocking (CDR): Yes
• Output +5V DDC Pin: 50mA max per output port
• Output Rise Time / Fall Time:
• 75 ps min - 144 ps max (20% - 80%)
• 0.12 UI min - 0.24 UI max (@ 1.65 Gbps, 20% - 80%)
• Connectors: HDMI Type A Female

* Dolby Digital and DTS support up to 48 kHz, 5.1 channels.

** 2 Channel L-PCM support up to 192 kHz at 1080p (50,59 60 Hz).
2 Channel L-PCM support up to 96 kHz at 720p (50,59 60 Hz), 1080p (24, 25, 30, 50, 59, 60 Hz), 1080i (50, 59, 60 fields).
2 Channel L-PCM support up to 48 kHz at all resolutions.

EDID

Standard Timing Identification:

• ID 1: 1920 x 1080 @ 60 Hz (This is the preferred timing identified in the EDID.)
• ID 2: 1680 x 1050 @ 60 Hz
• ID 3: 1600 x 1200 @ 60 Hz
• ID 4: 1280 x 800 @ 60 Hz
• ID 5: 1280 x 720 @ 60 Hz
• ID 6: 1280 x 1024 @ 60 Hz
• ID 7: 1360 x 765 @ 60 Hz
• ID 8: 1440 x 900 @ 60 Hz
• ID 9: 2048 x 1152 @ 60 Hz
• ID 10: 1600 x 900 @ 60 Hz
• ID 11: 1400 x 1050 @ 60 Hz
• ID 12: 1280 x 960 @ 60 Hz

Established Timing:

• 640 x 480 @ 60 Hz, 67 Hz, 72 Hz, 75 Hz
• 800 x 600 @ 56 Hz, 60 Hz, 72 Hz, 75 Hz
• 832 x 624 @ 75 Hz
• 1024 x 768 @ 60 Hz, 70 Hz, 75 Hz, 87 Hz
• 1280 x 1024 @ 75 Hz
• 1152 x 870 @ 75 Hz

Detailed Timing Blocks:

• 1920 x 1080 @ 60 Hz 148.5 MHz
• 1920 x 1080 @ 60 Hz 138.5 MHz
• 1920 x 1080 @ 60 Hz 141.5 MHz
• 1920 x 1200 @ 60 Hz 158.25 MHz
• 1920 x 1200 @ 60 Hz 154.0 MHz

CEA Video Information Code (VIC) Formats:

• VIC = 1, 640 x 480p 59.94/60 Hz 4:3
• VIC = 2, 720 x 480p 59.94/60 Hz 4:3
• VIC = 3, 720 x 480p 59.94/60 Hz 16:9
• VIC = 4, 1280 x 720p 59.94/60 Hz 16:9
• VIC = 5, 1920 x 1080i 59.94/60 Hz 16:9
• VIC = 6, 720(1440) x 480i 59.94/60 Hz 4:3
• VIC = 7, 720(1440) x 480i 59.94/60 Hz 16:9
• VIC = 14, 1440 x 480p 59.94/60 Hz 4:3
• VIC = 15, 1440 x 480p 59.94/60 Hz 16:9
• VIC = 16, Native 1920 x 1080p 59.94/60 Hz 16:9
• VIC = 17, 720 x 576p 50 Hz 4:3
• VIC = 18, 720 x 576p 50 Hz 16:9
• VIC = 19, 1280 x 720p 50 Hz 16:9
• VIC = 20, 1920 x 1080i 50 Hz 16:9
• VIC = 21, 720(1440) x 576i 50 Hz 4:3
• VIC = 22, 720(1440) x 576i 50 Hz 16:9
• VIC = 29, 1440 x 576p 50 Hz 4:3
• VIC = 30, 1440 x 576p 50 Hz 16:9
• VIC = 31, 1920 x 1080p 50 Hz 16:9
• VIC = 32, 1920 x 1080p 23.97/24 Hz 16:9
• VIC = 33, 1920 x 1080p 25 Hz 16:9
• VIC = 34, 1920 x 1080p 29.97/30 Hz 16:9
• VIC = 39, 1920 x 1080i 50 Hz 16:9
• VIC = 41, 1280 x 720p 100 Hz 16:9
• VIC = 42, 720 x 576p 100 Hz 4:3
• VIC = 43, 720 x 576p 100 Hz 16:9
• VIC = 44, 720(1440) x 576i 100 Hz 4:3
• VIC = 45, 720(1440) x 576i 100 Hz 16:9
• VIC = 47, 1280 x 720p 119.88/120 Hz 16:9
• VIC = 48, 720 x 480p 119.88/120 Hz 4:3
• VIC = 49, 720 x 480p 119.88/120 Hz 16:9

Audio Data Block:

• 2 Channel L-PCM 32, 44.1, 48, 88.2, 96, 176.4 192 kHz Sampling Frequency at 16, 20 or 24 bits per sample.
• AC-3 (Dolby Digital) 6 Channels (5.1) 48 kHz Sampling Frequency
• DTS 6 Channels (5.1) 48 kHz Sampling Frequency

RGBHV (BNC)

• Input Level (Max): ±1.5 Volts
• Input Impedance: 75 Ohms
• Output Level (Max): ±1.5 Volts
• Output Impedance: 75 Ohms
• Frequency Response
  • 300 MHz or better (±3 dB)
  • 100 MHz or better (±1.5 dB)
• Crosstalk
• <-60 dB (f = 5 MHz)
• <-35 dB (f = 150 MHz)
• Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
• Connectors: BNC

RGBHV (BNC)

• Input Level (Max): ±1.2 Volts
• Input Impedance: 75 Ohms
• Output Level (Max): ±1.2 Volts
• Output Impedance: 75 Ohms
• Frequency Response
  • 300 MHz or better (±3 dB)
  • 100 MHz or better (±2 dB)
  • 50 MHz or better (±1.5 dB)
• Crosstalk
• <-60 dB (f = 5 MHz)
• <-35 dB (f = 150 MHz)
• Signal to Noise Ratio: > 65 dB (Vin = 0.7 V, 100 IRE)
• Connectors: BNC

SYNC

• Input Level Signal Range: 0 to +5.5 Volts
• Input Impedance: 22 kOhms
• Output Level Signal Range: 0 to +5.5 Volts
• Output Impedance: 75 Ohms
• In/Out Polarity: Active High or Low (output following input polarity)
• Output Signal Level: Unity Gain
• Connectors: BNC

RGBHV (HD-15)

• Input Level (Max): ±1.5 Volts
• Input Impedance: 75 Ohms
• Output Level (Max): ±1.5 Volts
• Output Impedance: 75 Ohms
• Frequency Response
  • 300 MHz or better (±3 dB)
  • 100 MHz or better (±1.5 dB)
• Crosstalk
• <-60 dB (f = 5 MHz)
• <-35 dB (f = 150 MHz)
• Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
• HV Input Level Signal Range: 0 to +5.5 Volts
• HV Input Impedance: 22 kOhms
• HV Output Level Signal Range: 0 to +5.5 Volts
• HV Output Impedance: 75 Ohms
• HV In/Out Polarity: Active High or Low (output following input polarity)
• HV Output Signal Level: Unity Gain
• Connectors: HD-15

COMPONENT VIDEO

• Input Level (Max): ±1.5 Volts
• Input Impedance: 75 Ohms
• Output Level (Max): ±1.5 Volts
• Output Impedance: 75 Ohms
• Frequency Response
  • 300 MHz or better (±3 dB)
  • 100 MHz or better (±1.5 dB)
• Crosstalk
• <-60 dB (f = 5 MHz)
• <-35 dB (f = 150 MHz)
• Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
• Connectors: BNC

COMPONENT VIDEO

• Input Level (Max): ±1.2 Volts
• Input Impedance: 75 Ohms
• Output Level (Max): ±1.2 Volts
• Output Impedance: 75 Ohms
• Frequency Response
  • 300 MHz or better (±3 dB)
  • 100 MHz or better (±2 dB)
  • 50 MHz or better (±1.5 dB)
• Crosstalk
• <-60 dB (f = 5 MHz)
• <-35 dB (f = 150 MHz)
• Signal to Noise Ratio: > 65 dB (Vin = 0.7 V, 100 IRE)
• Connectors: BNC

DIGITAL VIDEO - 8x8 DVI

• Data Rate (Max): 4.95 Gbps
• Pixel Clock (Max): 165 MHz
• Resolution Support: Up to 1920x1200 @ 60 Hz
• Signal Type: DVI-D (Single Link)
• DDC/EDID Support:
• EDID Provided by the Optima
• EDID is user re-programmable
• HDCP Support: No
• Input Voltage (Nominal): 1.0 Vpp Differential
• Input Voltage (Max.): 1.5 Vpp Differential
• Input Equalization: Up to 40 dB Automatic
• Input Cable Length (Typ): Up to 50 ft, 1920x1200 @ 60 Hz over High Quality DVI Cable
• Input Cable Length (Max): Up to 100 ft, 1920x1200 @ 60 Hz over High Quality DVI 24 AWG, Shielded-Twisted Pair Cable. Requires a source signal amplitude of 1Vpp driving the cable.
• Output Nominal Voltage: 1.0 Vpp Differential
• Output Re-clocking (CDR): Yes
• Output Pre-emphasis: Yes, for improved cable drive
• Output +5V DDC Pin :
• 1 A shared total available on outputs 1 - 4
• 270 mA shared total available on outputs 5 - 8
• Output Rise Time / Fall Time :
• 80 ps min - 200 ps max (20% - 80%)
• 0.13 UI min - 0.33 UI max (@ 1.65 Gbps, 20% - 80%)
• Connectors : DVI-I female (DVI-D Single Link is the supported signal type)

EDID - 8x8

Standard Timing Identification:

• ID 1: 1920 x 1200 @ 60 Hz (This is the preferred timing identified in the EDID.)
• ID 2: 1920 x 1080 @ 60 Hz
• ID 3: 1680 x 1050 @ 60 Hz
• ID 4: 1600 x 1200 @ 60 Hz
• ID 5: 1280 x 800 @ 60 Hz
• ID 6: 1280 x 720 @ 60 Hz
• ID 7: 1280 x 1024 @ 60 Hz
• ID 8: 640 x 480 @ 120 Hz

Established Timing:

• 720 x 400 @ 70 Hz, 88 Hz
• 640 x 480 @ 60 Hz, 67 Hz, 72 Hz, 75 Hz
• 800 x 600 @ 56 Hz, 60 Hz, 72 Hz, 75 Hz
• 832 x 624 @ 75 Hz
• 1024 x 768 @ 60 Hz, 70 Hz, 75 Hz, 87 Hz
• 1280 x 1024 @ 75 Hz
• 1152 x 870 @ 75 Hz

DIGITAL VIDEO - 4x4 DVI

• Data Rate (Max): 4.95 Gbps
• Pixel Clock (Max): 165 MHz
• Resolution Support: Up to 1600x1200 @ 60 Hz
• Signal Type: DVI-D (Single Link)
• DDC/EDID Support: EDID Provided by the Optima
• HDCP Support: No
• Input Voltage (Nominal): 1.0 Vpp Differential
• Input Voltage (Max): 1.5 Vpp Differential
• Output Nominal Voltage: 1.0 Vpp Differential
• Output Re-clocking (CDR): Yes
• Output +5V DDC Pin: 50 mA available on each output
• Output Rise Time / Fall Time:
• 75 ps min - 240 ps max (20% - 80%)
• 0.12 UI min - 0.4 UI max (@ 1.65 Gbps, 20% - 80%)
• Connectors: DVI-I female (DVI-D Single Link is the supported signal type)
• NOTE: Power requirements for this board allow for no more than 4 boards in a single enclosure

EDID - 4x4

Standard Timing Identification:

• ID 1: 1600 x 1200 @ 75 Hz (This is the preferred timing identified in the EDID)
• ID 2: 640 x 480 @ 120 Hz
• ID 3: 1024 x 768 @ 120 Hz
• ID 4: 1280 x 1024 @ 85 Hz
• ID 5: 800 x 600 @ 120 Hz
• ID 6: 1152 x 864 @ 120 Hz
• ID 7: 1600 x 1200 @ 60 Hz
• ID 8: 1280 x 800 @ 60 Hz

Established Timing:

• 720 x 400 @ 70 Hz, 88 Hz
• 640 x 480 @ 60 Hz, 67 Hz, 72 Hz, 75 Hz
• 800 x 600 @ 56 Hz, 60 Hz, 72 Hz, 75 Hz
• 832 x 624 @ 75 Hz
• 1024 x 768 @ 60 Hz, 70 Hz, 75 Hz, 87 Hz
• 1280 x 1024 @ 75 Hz
• 1152 x 870 @ 75 Hz

STANDARD DEFINITION SERIAL DIGITAL VIDEO (SD-SDI)

• Standard: Conforms to SMPTE-259M, SMPTE-344M
• Input Impedance: 75 Ohms
• Input Level (Max): 0.8 Vpp, ±10%
• Output Impedance: 75 Ohms
• Output Level (Max): 0.8 Vpp, ±10%
• Timing Jitter: <0.1 UI @ 360 Mbps
• Alignment Jitter: <0.1 UI @ 360 Mbps
• Rise and Fall Time: 600 ps, ±100 ps (20%-80%)
• Bit Rates: 143 Mbps, 177 Mbps*, 270 Mbps, 360 Mbps, 540 Mbps* (*Data not available for 177 & 540 Mbps bit rate)
• Data Types: 8 bit or 10 bit
• Auto Cable Equalization: Up to 350m of Belden 8281 or equivalent @ 270 Mbps
• Auto Data Rate Lock: Yes
• CDR (Reclocking): Yes
• Connectors: BNC

HIGH DEFINITION SERIAL DIGITAL VIDEO (HD-SDI)

• Standard: Conforms to SMPTE-259M, SMPTE-292M, SMPTE-344M, SMPTE-372M* (*Data not available for SMPTE-372M dual-link format)
• Input Impedance: 75 Ohms
• Input Level (Max): 0.8 Vpp, ±10%
• Output Impedance: 75 Ohms
• Output Level (Max): 0.8 Vpp, ±10%
• Timing Jitter: <0.1 UI @ 1.485 Gbps
• Alignment Jitter: <0.1 UI @ 1.485 Gbps
• Bit Rates: 143 Mbps, 177 Mbps*, 270 Mbps, 360 Mbps, 540 Mbps*, 1.485 Gbps (*Data not available for 177 & 540 Mbps bit rate)
• Data Types: 8 bit or 10 bit
• Auto Cable Equalization
• Up to 140m of Belden 1694A or equivalent @ 1.485 Gbps
• Up to 100m of Belden 8281 or equivalent @ 1.485 Gbps
• Auto Data Rate Lock: Yes
• CDR (Reclocking): Yes
• Connectors: BNC

S-VIDEO

• Input Level (Max): ±2.5 Volts
• Input Impedance: 75 Ohms
• Output Level (Max): ±2.5 Volts
• Output Impedance: 75 Ohms
• Frequency Response
• 50 MHz or better (±3 dB)
• 15 MHz or better (±1 dB)
• Crosstalk: <-60 dB (f = 5 MHz)
• Differential Gain: <0.2% or better (f = 3.58 Mhz)
• Differential Phase: <0.2° or better (f = 3.58 Mhz)
• Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
• Connectors: S-Video (4-pin Mini-DIN)

Y/c VIDEO

• Input Level (Max): ±2.5 Volts
• Input Impedance: 75 Ohms
• Output Level (Max): ±2.5 Volts
• Output Impedance: 75 Ohms
• Frequency Response
• 50 MHz or better (±3 dB)
• 15 MHz or better (±1 dB)
• Crosstalk: <-60 dB (f = 5 MHz)
• Differential Gain: <0.2% or better (f = 3.58 Mhz)
• Differential Phase: <0.2° or better (f = 3.58 Mhz)
• Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
• Connectors: BNC

COMPOSITE VIDEO

• Input Level (Max): ±2.5 Volts
• Input Impedance: 75 Ohms
• Output Level (Max): ±2.5 Volts
• Output Impedance: 75 Ohms
• Frequency Response
• 50 MHz or better (±3 dB)
• 15 MHz or better (±1 dB)
• Crosstalk: <-60 dB (f = 5 MHz)
• Differential Gain: <0.2% or better (f = 3.58 Mhz)
• Differential Phase: <0.2° or better (f = 3.58 Mhz)
• Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
• Connectors: BNC

AUDIO

STANDARD AUDIO

• Input Level (Max): +22 dBu, balanced
• Input Impedance: 18 kOhms
• Output Level (Max): +22 dBu, balanced
• Output Impedance: 50 Ohms
• Frequency Response: <±0.2 dB (20 Hz to 20 kHz)
• THD + Noise
  • <0.03% (20 Hz to 20 kHz, Vin = -10 to +10 dBu)
  • <0.01% (20 Hz to 20 kHz, Vin = 0 to +22 dBu)
• Signal to Noise Ratio: >120 dB (20 Hz to 20 kHz, Vin = +20 dBu)
• Crosstalk: <-110 dB (1 kHz, Vin = +20 dBu)
• Input Gain Adj. Range
  • ±10 dB, via serial/control panel

  Total of input gain plus output gain cannot exceed +10 dB

• Output Volume Adj. Range
  • +10 dB to -70 dB (mute), via serial/control panel

  Total of input gain plus output gain cannot exceed +10 dB

• Connectors: 5T

DIGITAL AUDIO

• Resolution: 16 to 24 bit
• Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
• Rise & Fall Time: <20 nS
• Jitter: <5 nS
• CDR (Reclocking): Yes
• Connectors: TosLink (Optical)

CATPRO

RGBHV + STEREO (IN) TO CATPRO (OUT)*

• Signal Types:
• Input: RGBHV + Stereo Audio (HD-15 & 5T)
• Output: CatPro RGBHV + Stereo Audio (RJ-45)
• Maximum Resolution: 1600x1200(4:3) and 1920x1080p(16:9) @ 60 Hz up to 1000 ft
• RGB In Signal Level Range (Max): +0.75 V to -0.3 V typical (terminated)
• RGB Out Signal Level Range (Max): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Receiver)
• RGB Out Skew Adjustment: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Receiver)
• RGB In/Out Impedance: 75 Ohms
• RGB SNR: >50 dB (Vin = 0.7 V, 100 IRE)
• RGB Crosstalk:
• <-60 dB (f = 5 MHz)
• <-45 dB (f = 30 MHz)
• Sync In Impedance: 2.2 kOhms
• Sync In/Out Polarity: Active High or Low (output follows input polarity)
• Sync Out Signal Levels: Low = 0 V, High = +5 V (unterminated)
• Audio In/Out Signal Types: Stereo, Balanced or Unbalanced In / Unbalanced Out
• Audio In/Out Signal Level (Max): +8 dBu
• Audio In Impedance: 18 kOhms
• Audio Output Impedance: <5 Ohms
• Audio Frequency Response: <±0.3 dB, 20 Hz to 20 kHz
• Audio THD+N: <0.04 %, 1 kHz, -10 dBu to +4 dBu
• Audio Crosstalk: <-95 dB (1 kHz, Vin = +4 dBu)
• Audio SNR: >85 dB, 20 Hz to 20 kHz Vin = +8 dBu
• Audio Out Volume Adj. Range: Mute to +6 dB (user adjustable at CatPro Receiver)
• RGBHV Input Connector: Female HD-15
• Stereo Audio Input Connector: 5T
• RGBHV + Stereo Output Connector: Female RJ-45
• Compatible Cable Types:
• Category Cable 5, 5e, 6, 6e, UTP, and STP

All measurements were taken using Cat5e Cable

*All Specs are defined for use in conjunction with a CatPro Receiver.