NOTE: Prior to upgrading to this release from any versions prior to v2.55.43 please contact AMX Technical Support.

• Fix for WPA reauthentication issues.
• Delete EAP key file on panel boot to force new key retrieval.
• New/updated Marvel wireless driver is included in this release.
• New/updated DeviceScape wireless security supplicant is included in this release.
• Fix for door bell tone when working with Metreau Entry Communicator.
• FTP of dynamic image fix.
• DHCP timeout fix. Timeout for DHCP changed from one minute to one hour.
• DNS fix. Panel will now correctly retrieve DNS information.
• Panel will now correctly register itself with DNS server.
• Fix for panel lockup when panel goes to sleep (blank screen).
• Fix for panel lockup (buttons not working) when panel is not asleep.
• Major stability issues are resolved in this release.
• In previous builds, when Site Survey page was accessed and exited the panel would enter "roaming enabled" mode until panel was rebooted. This has been fixed.
• Some timeouts have been modifed in the wireless supplicant to loosen the restrictions placed on a battery powered device. This should help panels with online/offline issues.
• Many changes incorporated to resolve several online/offline issues that have been reported from the field.
• Changes made to better handle deauthentication/reauthentication events initiated by the WAP.
• Fix to allow firmware download to cradle. This has been broken in previous builds.
• Firmware now correctly puts flash into correct state prior to reboot to ensure data is not lost.
• Enhanced 802.11 EAP enabled connectivity.
• Fix for G4 restart issue.

NOTE: Prior to upgrading to this release from any versions prior to v2.55.43 please contact AMX Technical Support.

• Fix for WPA reauthentication issues
• Delete EAP key file on panel boot to force new key retrieval
• New/updated Marvel wireless driver is included in this release
• New/updated DeviceScape wireless security supplicant is included in this release
• FTP of dynamic image fix
• DHCP timeout fix. Timeout for DHCP changed from one minute to one hour.
• DNS fix. Panel will now correctly retrieve DNS information.
• Panel will now correctly register itself with DNS server.
• Fix for panel lockup when panel goes to sleep (blank screen).
• Fix for panel lockup (buttons not working) when panel is not asleep.
• Major stability issues are resolved in this release.
• In previous builds, when Site Survey page was accessed and exited, the panel would enter "roaming enabled" mode until panel was rebooted.
• Some timeouts have been modifed in the wireless supplicant to loosen the restrictions placed on a battery powered device. This should help panels with online/offline issues.
• Many changes incorporated to resolve several online/offline issues that have been reported from the field.
• Changes made to better handle deauthentication/reauthentication events initiated by the WAP.
• Fix to allow firmware download to cradle. This has been broken in previous builds.
• Firmware now correctly puts flash into correct state prior to reboot to ensure data is not lost.
• Enhanced 802.11 EAP enabled connectivity.
• Fix for G4 restart issue.

NOTE: Requires latest master firmware (Build 352 or greater). If latest master firmware is not used, when connection utility is invoked the master may become unresponsive.

• Fixes distortion of composite video

NOTE: Use of the new Connection Utility feature on the setup pages requires master firmware Build 352 or greater.

New Features:

• Increased IR receiver range
• Eliminated pixel noise in video windows

New Features:

• Added Marvell G card roaming capability on channels 1, 6 and 11
• Added query to retrieve the web control name on any port number
• Added command to mute the mic during an intercom call
• Added query to retrieve intercom diagnostics information
• Added diagnostics to setup pages
• Rearranged buttons on setup pages for more consistent order
• Corrected an audio bug that prevented doorbell tones from playing properly

NOTE: Requires latest master firmware (Build 352 or greater). If latest master firmware is not used, when connection utility is invoked the master may become unresponsive.

New Features:

• Fixed an Issue with IR receiver sensitivity
• Fixed an issue with pixel noise in video display
• Added in the intercom tab which was removed in a previous build
• Fixed issues that would cause intermittent boot failure
• Fixed issues that would cause intermittent network failure
• Fixed issues that would cause loss of persistent data

New Features:

• Added Marvell G card roaming capability on channels 1, 6 and 11
• Added query to retrieve the web control name on any port number
• Added command to mute the mic during an intercom call
• Added query to retrieve intercom diagnostics information
• Added diagnostics to setup pages
• Rearranged buttons on setup pages for more consistent order
• Corrected an audio bug that prevented doorbell tones from playing properly

NOTE: Requires latest master firmware (Build 352 or greater). If latest master firmware is not used, when connection utility is invoked the master may become unresponsive.

New Features:

• Major setup page changes to add additional functionality and help with diagnosing problems
• Several sustaining issues were resolved in this release relating to memory management
• Panel lockup related to the I2C bus is resolved in this release
• New Ethernet driver has been put in place that is much more efficient and will keep large amounts of data received from making the panel appear "sluggish"
• Screen flickering on wakeup from panel sleep was resolved

The NXA-AVB/RGB Ethernet/RGB Breakout Box (FG2254-11) allows any of AMX's VG-Series Modero Touch Panels to accept and display both RGB or HDTV Component signals directly from an external source.

New Features: Enhanced speed on mouse and keyboard pass through (this feature requires Modero VG Series RGB Interface Card firmware v1.16 or higher)

Note: When working with firmware, it is important to note that version 1.xx of firmware should only be loaded onto boxes using 1.xx series firmware. The version 2.xx firmware should only be loaded onto boxes running 2.xx series firmware. To confirm the current firmware version, you can either navigate to the BOB Version field on the RGB Adjustment page or launch NetLinx Studio and open the Online Tree tab. Modero VG touch panel firmware 2.60.27 or higher is required to download v2.xx firmware into the break out box.

The NXA-AVB/RGB Ethernet/RGB Breakout Box (FG2254-11) allows any of AMX's VG-Series Modero Touch Panels to accept and display both RGB or HDTV Component signals directly from an external source.

New Features: Adds support for RoHS-compliant USB chip.

NOTE: When working with firmware, it is important to note that version 1.xx of firmware should only be loaded onto boxes using 1.xx series firmware. The version 2.xx firmware should only be loaded onto boxes running 2.xx series firmware. To confirm the current firmware version, you can either navigate to the BOB Version field on the RGB Adjustment page or launch NetLinx Studio and open the Online Tree tab. Modero VG touch panel firmware 2.60.27 or higher is required to download v2.xx firmware into the break out box.

NXA-RGB is a plug-in RGB interface card for Modero VG series touch panels. Field upgradable, the card integrates with RJ-45 RGB connector found on all VG series panels.

• Improved speed and efficiency for USB mouse and keyboards (this feature requires NXA-AVB/RGB Modero RGB AV Breakout Box v1.12 or higher version).
• Improved HD satellite receivers synchronization

Touch Monitors Tested with TPI-PRO:

• Serial Drivers
• ELO (15") ET1525L-7UWA-1
• ELO (15") ER1565-114
• ELO (15") ET1525L-7SWA-1
• NEC (18") ET1825L-8SWA-1
• Microtouch (15") Part No: 41-9536-94-00
• Dynapro
• EZ Screen
• EZ Screen V6
• Wacom
• Wacom2
• IST TOUCH
• Smart Tech
• Sanyo
• SyncMaster 173V
• Eyegonomic
• Next Windows
• Element One
• USB Touch Drivers
• ELO ET1515L ET1515L-7CWA-1
• NEC MultiSync LCD (ELO Touch) 2090Uxi
• 3M Microtouch 15" Part #11-81375-225
• Pixel Touch 15" 70FA2
• EZ Screen 15" 71A0

New Features:

• Added support for Smart Sympodium ID350, Eizo Flexscan 17", Wacom DTF-521, and DTF-720

Until recently, most monitor makers did not worry about compliance with VESA standards. In the last couple of years they have started to implement the VESA standards and the NXP-TPI/4 needs an update to match those standards.

Installing the VESA compliant firmware without a chip change or hardware modification results in a TPI/4 that will not work properly. To prevent these problems, starting with firmware version 2.63.4 we will not post the latest version of firmware on the website (until further notice). In order to do a field update of the NXP-TPI/4 you will need to contact Technical Support to obtain the firmware KIT file.

If your unit has firmware of 2.60.75 or higher, it has the necessary modifications, and can accept the new firmware with no issues. If it has a lower version of firmware, the assumption is the modifications must be done, and the unit will need to be sent in for our repair department to make the changes. This will be done under standard AMX warranty policy.

For more information please see Tech Note TN643 or contact AMX Technical Support to obtain an RMA to implement the changes.

• Adds WPA/WPA2 Security.
• Fixes root failing to ping repeater if Root AP is power cycled
• Fixes repeater not recovering connection if Root AP is powered down for over 20 minutes
• Adds MAC filtering
• Adds NULL check in CGI to prevent system crash if HTTP attack
• Adds web UI for 11b only radio mode
• Fixes wizard page wpa-psk setting
• Adds VAP priority support
• Fixes scan function in repeater mode
• Fixes bug in static ip subnet mask
• Adds settings of WEP key index and key length of wizard page
• Fixes bug where Wizard did not set all WEP keys on VAP#2
• Fixes WEP status feedback button
• Fixes Repeater mode
• Fixes not allowing country code cannot reset in GUI
• Adds ability to select and store multiple WEP keys
• Adds displaying of all MAC addresses on Details page
• Fixes functionality of cancel button on setup wizard
• Adds more detailed instructions to reboot page
• Clarifies wording in setup wizard
• Adds firmware upgrade progress bar
• Adds exception list for MAC addresses
• Fixes VAP Management priority for VAP1
• Fixes functionality of subnet mask

• Adds level control to Bar Graph (Level 1)
• Adds level control to MET-6N Wheel clockwise/counter-clockwise spins (Level 2)
• Fixed bug where releases were being missed when multiple pushes were performed simultaneously
• Fixed bug when communication is lost to keypad (i.e. Master re-boots) the keypad values are now reset (the values were not being reset in previous version)

• Fixed the IR + RF Mode for the Mio R-2
• Improved the battery measurements on all units
• Improved recharging capabilities for the R-1/R-2
• Split the R-1/R-2 and Attache into separate device types

• Fixed: DMS keypads may lose internal commands
• Fixed: DMS keypad lockups during wakeup process
• Fixed: Checksum mismatch causing problem with storing device serial number
• Fixed: NDP connection; Problem with DMS keypads unbinding in secured mode
• Fixed: Problem with set time when using NI-X00 vs NI-X00X
• Increased File Allocation (descriptors) and added protection from overuse

NOTE: It is recommended all ZigBee-based products be upgraded to the latest firmware.

• *** Requires ZigBee module firmware version 1.01.13 ***
• *** Requires Gateway version 1.01.15 ***

• Added scrolling text entry to support alternate keypad layouts

NOTE: It is recommended all ZigBee-based products be upgraded to the latest firmware.

• *** Requires Gateway version 1.01.20 ***
• *** The ZigBee Version on the Gateway and Repeater will remain at 1.01.12 for this release - this is intentional***

• Gateway: 1.01.20 ("Details" Page should show main f/w version 1.01.20, ZigBee 1.01.12)
• Repeater: 1.01.12 (No repeater update from initial release necessary)
• MIO-R4: 2.62.4
• MIO-R4 & MIO-R3 ZigBee Module: 1.01.14

New Features:

• Increased response time of roaming in Gateway PPC code
• Lowered timeout on failed messages to 2 seconds in Gateway PPC code
• Commented out all "need upgrades" in Gateway PPC code to prevent repeater upgrades
• Added code to R4/R3 ZigBee module to send multiple gateway heartbeat requests when the stack indicates that the network is up
• Lowered the required number of failed polls in the R4/R3 ZigBee module before initiating a roam
• Added code to R4/R3 ZigBee module to increment the failed polls counter upon a failure to send a radio message

NOTE: It is recommended all ZigBee-based products be upgraded to the latest firmware.

NOTE: It is recommended all ZigBee-based products be upgraded to the latest firmware.

• *** Requires Gateway version 1.01.20 ***
• *** The ZigBee Version on the Gateway and Repeater will remain at 1.01.12 for this release - this is intentional***

• Gateway: 1.01.20 ("Details" Page should show main f/w version 1.01.20, ZigBee 1.01.12)
• Repeater: 1.01.12 (No repeater update from initial release necessary)
• MIO-R4: 2.62.4
• MIO-R4 & MIO-R3 ZigBee Module: 1.01.14

New Features:

• Increased response time of roaming in Gateway PPC code
• Lowered timeout on failed messages to 2 seconds in Gateway PPC code
• Commented out all "need upgrades" in Gateway PPC code to prevent repeater upgrades
• Added code to R4/R3 ZigBee module to send multiple gateway heartbeat requests when the stack indicates that the network is up
• Lowered the required number of failed polls in the R4/R3 ZigBee module before initiating a roam
• Added code to R4/R3 ZigBee module to increment the failed polls counter upon a failure to send a radio message

• Fixed the IR + RF Mode for the Mio R-2
• Improved the battery measurements on all units
• Improved recharging capabilities for the R-1/R-2

• Fixed Configuration Manager:
• Host Name field is getting suffixed with some characters when it is less than 8
• Year should be changed in "Copyright 2007"
• Could not access unit if the HostName saved with a space or name contains space
• Modified audio properties to come up 50% values
• Fixed: Audio becomes one way when running with video
• Fixed: Unit falls off master's bus and not coming online saved with a space or name contains space
• Fixed: Can not establish multi-cast calls if uni-cast call has already been performed
• For consistency MET-ECOM now supports the ^MODEL? command

• Fixed socket resource leak involving HTTPS connections to the master's Web interface
• Fixed socket resource leak involving unnecessary socket opened for AMX Device Discovery
• Modified master to disallow the addition of the master's IP address to the URL list
• Fixed ARP request processing
• Modified Java memory partitioning to more efficiently use the Java heap and minimize garbage collections
• Modified ICSP Ping processing to support more robust wireless panel connectivity
• Fixed GET_LAST to work properly with levels for DEV and DEVLEV arrays
• Fixed NI-x100 version display scheme to match other master formats
• Increased Duet startup timeout to support Java debugging under new startup sequence

• Modified Web page javascript files to shrink their size
• Fixed Device number refreshing on the master's Change Device Web interface
• Fixed Diagnostics Web interface to properly represent user selections of Strings FROM Device and Strings TO Device
• Fixed Manage NetLinx Web page header
• Fixed Web XML content creation to properly handle special characters preventing proper display of the Manage NetLinx Web page
• Fixed mouse-over feature on Bind Web page
• Fixed Add User Defined Device refresh issue where added item wouldn't immediately show up on the list
• Modified the Web access under Configuration Security
• Modified Clock Manager Web pages to disable DST and NIST Server sub-pages while in Standalone mode

• Fixed AxLink problems when there is AxLink traffic on startup

Initial Release

• Modified Device firmware to recognize NI-X101

• Fixed socket resource leak involving HTTPS connections to the master's Web interface
• Fixed socket resource leak involving unnecessary socket opened for AMX Device Discovery
• Modified master to disallow the addition of the master's IP address to the URL list
• Fixed ARP request processing
• Modified Java memory partitioning to more efficiently use the Java heap and minimize garbage collections
• Modified ICSP Ping processing to support more robust wireless panel connectivity
• Fixed GET_LAST to work properly with levels for DEV and DEVLEV arrays
• Increased Duet startup timeout to support Java debugging under new startup sequence

• Modified Web page javascript files to shrink their size
• Fixed Device number refreshing on the master's Change Device Web interface
• Fixed Diagnostics Web interface to properly represent user selections of Strings FROM Device and Strings TO Device
• Fixed Manage NetLinx Web page header
• Fixed Web XML content creation to properly handle special characters preventing proper display of the Manage NetLinx Web page
• Fixed mouse-over feature on Bind Web page
• Fixed Add User Defined Device refresh issue where added item wouldn't immediately show up on the list
• Modified the Web access under Configuration Security
• Modified Clock Manager Web pages to disable DST and NIST Server sub-pages while in Standalone mode

• Fixed HCS12 FW download FWID check
• Fixed infinite loop condition with zero length timeline events
• Changed Master-to-onboard-device I2C bus speed from 100kbps to 400kbps to increase compatability with higher baud rates on multiple ports
• Added Timeline loop count in Interpreter to handle consecutive zero length timeline events
• Added "set timeline loopcnt" command to telnet interface to modify the Interpreter's timeline loop count
• Fixed IO channel status reporting

• Fixed AxLink problems when there is AxLink traffic on startup

• Fixed AxLink problems when there is AxLink traffic on startup

• Fixed socket resource leak involving HTTPS connections to the master's Web interface
• Fixed socket resource leak involving unnecessary socket opened for AMX Device Discovery
• Modified master to disallow the addition of the master's IP address to the URL list
• Modified Java memory partitioning to more efficiently use the Java heap and minimize garbage collections
• Modified ICSP Ping processing to support more robust wireless panel connectivity
• Fixed GET_LAST to work properly with levels for DEV and DEVLEV arrays
• Increased Duet startup timeout to support Java debugging under new startup sequence

• Modified Web page javascript files to shrink their size
• Fixed Device number refreshing on the master's Change Device Web interface
• Fixed Diagnostics Web interface to properly represent user selections of Strings FROM Device and Strings TO Device
• Fixed Manage NetLinx Web page header
• Fixed Web XML content creation to properly handle special characters preventing proper display of the Manage NetLinx Web page
• Fixed mouse-over feature on Bind Web page
• Fixed Add User Defined Device refresh issue where added item wouldn't immediately show up on the list
• Modified the Web access under Configuration Security
• Modified Clock Manager Web pages to disable DST and NIST Server sub-pages while in Standalone mode

• Fixed socket resource leak involving HTTPS connections to the master's Web interface
• Fixed socket resource leak involving unnecessary socket opened for AMX Device Discovery
• Modified master to disallow the addition of the master's IP address to the URL list
• Modified Java memory partitioning to more efficiently use the Java heap and minimize garbage collections
• Modified ICSP Ping processing to support more robust wireless panel connectivity
• Fixed GET_LAST to work properly with levels for DEV and DEVLEV arrays
• Increased Duet startup timeout to support Java debugging under new startup sequence

• Modified Web page javascript files to shrink their size
• Fixed Device number refreshing on the master's Change Device Web interface
• Fixed Diagnostics Web interface to properly represent user selections of Strings FROM Device and Strings TO Device
• Fixed Manage NetLinx Web page header
• Fixed Web XML content creation to properly handle special characters preventing proper display of the Manage NetLinx Web page
• Fixed mouse-over feature on Bind Web page
• Fixed Add User Defined Device refresh issue where added item wouldn't immediately show up on the list
• Modified the Web access under Configuration Security
• Modified Clock Manager Web pages to disable DST and NIST Server sub-pages while in Standalone mode

• Added Timeline loop count in Interpreter to handle consecutive zero length timeline events
• Added "set timeline loopcnt" command to telnet interface to modify the Interpreter's timeline loop count
• Fixed IO channel status reporting

• Added pacing messages generated by a refresh Network from NetLinx Studio to reduce the message backup when many masters are connected
• Closes ICSP and Telnet IP connections before rebooting
• Fixed problem with GenerateGroupList on Modify User page
• Fixed problem with ICSP IP connections being rejected

Note: Installing this firmware will result in the device ID being set to 32000. It will be necessary to change it back to the desired value. Default setting for NI Series is 5001.

• Corrected problems with XCH command.
• Corrected the way some IR is pulsed. Now it correctly mimics continuous pulses at the beginning, middle, and end of the IR data. Now it also correctly pulses IR with a fixed number of pulses.
• Fixed problems with IR pulsing fixed number of repeats causing IR pulses to be pulsed back-to-back with no off time.

• GET MODE send command to return IO LINK status
• SET I/O LINK command to allow 0 to disable link
• IR subchannel modulation
• CardFrame misread during insertion

• Fixed Voltage Ramp down after startup bug
• Added DEFAULT ALL Command
• Added DEFAULT Command

• Reduced the frequency of level update messages to help reduce message overflows
• Changed Vol to Vol4 in all ID messages
• Updated AMX branding

NOTE: Verson 8.03 firmware can be loaded on Mi Series Controllers with existing firmware greater than or equal to version 7.00. When loading version 8.03 firmware to Tango or Mi Series Controllers and Expanders, use the Tango/Mi Device Programmer version 7.05.

NOTE: Verson 8.03 firmware can be loaded on Mi Series Controllers with existing firmware greater than or equal to version 7.00. When loading version 8.03 firmware to Tango or Mi Series Controllers and Expanders, use the Tango/Mi Device Programmer version 7.05.

• Corrected red skew adjustment from web pages (didn't update red previously)
• Added delay between multiple defined events in User control actions

• Corrected 9115 initialization (in case of spurious test mode boot)
• Changed key mapping to conform to latest RC-02 drawing

• Added support for higher serial speeds/parities - supports up to 38400bps at all parities
• Added 'o'command to setup menu to change speed/parity locally when not supported by connected hub
• Corrected boot error where RX02 would default to common mode
• Corrected parity errors on low speed serial settings

• This firmware must be obtained by contacting AMX Technical Support
• Firmware upgrades require firmware revision 4.34.33 or 4.34.37

• Fixed loss of communication faults from the server to WinMAX and other interfaces caused by null data fields that could exist in the database
• Fixed accessibility of online content service on some networks
• Fixed server lockup issues if an incorrect command was sent to the server
• Fixed record progress bar for all media recorded via the server DVD
• Fixed MAX-AVP video playback when lost after a period of time
• Fixed DVD identification issues
• Created default track names
• Fixed issue when importing a DVD without performing an "Identify" command where no chapter information would populate in the chapter tables
• Fixed errors occurring if a "Play DVD Chapter" command is sent with a Track ID that does not exist

• Fixed issue where MAX-AVP would periodically drop offline or hang and improved system stability
• System now detects and handles any missing CD album or track data when encountered and operates as expected
• MAX-AVP is now compatible with display devices with HDMI 1.3
• Added a watchdog to monitor critical subsystems to detect and recover from faults
• Added network monitor feature to automatically reboot if the MAX-AVP loses communication with the server for over 5 minutes. If MAX-AVP is used without a server then the user must change the "Network Mode:" setting to "Standalone" under the Setup/Settings page of the MAX-AVP. Otherwise the AVP will reboot every 5 minutes. This feature is on by default after upgrading to v1.20.4.

• Fixed firmware upgrades via web issues
• Fixed Play/Stop hanging issue
• Fixed RTSP premature stop issue
• Added ICSP security/encryption

• Fixed firmware upgrades via web issues
• Fixed 7th udp mode streaming disruption issue
• Fixed MP3 lockup issue
• Fixed Play/Stop hanging issue
• Added ICSP security/encryption
• Updated Web interface look and feel

• A "Factory Defaulted" Radia Eclipse will now have the factory presets after a reboot of the Radia Eclipse
• XML loaded presets now will remain loaded after a reboot of the Radia Eclipse
• Ramping the Active Preset via channel now clears preset channel feedback

Fixed:

• Fixed SEND_STRING: "13" for All Stop doesn't work if explicit stop string is used first
  NOTE: even though a lone "13" works as All Ramp Stop for backwards compatibility with older Radia, it is preferred that ramps be stopped explicitly via the "'circuit# S',13" string
• Curves Fixed:
• Curve 6 - slight voltage bump with AXlink level change 89-90
• Curve C - slight voltage bump with AXlink level change 89-90
• Curve 5 - slight voltage bump with AXlink level change 129-130
• NOTE: the RLY output is the only Radia Eclipse output that can function in the Phase Error condition, and then only via Dry Closure control

This firmware is programmed into an E-PROM chip and not available as a download. Please order the free replacement chip using part number: PC606-A.

• Improved ProLink interface error detection and message handling
• Added phase/zero-crossing detection and correction features at startup and reset
• Reduces AxLink controller lock-ups and Radia devices from dropping off line

Known Issues: This firmware disables most of the return responses from ProLink programming strings. AxLink responses and feedback will work as normal.

NOTE: This firmware requires PTE-300 Duet module v2.3.0 or later. The PTE-300 Duet module and user interface TP4 file are available for download by searching Device Model PTE-300 from the InConcert Resource Center on amx.com. When used with an NXP-PLV Camera Controller, the NXP-PLV firmware must be upgraded to 2.80.18 or later.

• Improved the slow motion algorithm for use with the new quiet motors
• The PTE-300 will now send its IP address out the serial port when the joyswitch is held down for 5 seconds
• Fixed a bug in the Read Serial # routine that could cause unit to lock up
• Added support for Odd parity on the RS-232 port
• Corrected polarity of Auto/Manual iris signals
• Unit no longer needs to be power cycled after making changes to the web configuration pages

NOTE: Joystick recalibration is required after firmware upgrades. When used with a PTE-300 pan/tilt head, the PTE-300 firmware must be upgraded to v1.21 or later. The PTE-300 Duet module and user interface TP4 file are available for download by searching Device Model PTE-300 from the InConcert Resource Center on amx.com.

• Native 12-bit sampling is used for camera controls
• Eliminated math errors due to clock adjustments
• Reduced message traffic to master
• Joystick and knob levels can now be enabled/disabled. By default, the following levels are enabled: 4,5,7,8,9
• Joystick and knob levels can now be set to 8-bit or 16-bit resolution. By default, the following levels are 8-bit: 1,2,7,8,9,10,11. By default, the following levels are 16-bit: 3,4,5,6
• Added Send Commands ?PLL, ^PLE, ^PLD, ^PLR

This "down" TSK file supports the AXB-PT15 only. If loaded on an AXB-PT10 or AXB-PT30, the unit will go into boot mode waiting on a download of the correct "down" TSK file.

• Corrected problem with re-calling of zoom and lens presets when in motor mode with pots using speed control
• Corrected PAN and TILT level reporting for the G1L and G2L commands

New Features: Added support for external buttons for Pilot applications.